Toshiba Satellite 4030CDT - Connecting a Mouse; Connecting a Serial Mouse

Getting Started
Connecting a mouse
6 Connect the AC adapter to the computer and plug the power
cable into an AC outlet.
7 Press the power button to boot the computer.
When you turn on your computer, it automatically recognizes
the new memory configuration.
Connecting a mouse
You can connect a mouse to the computer instead of using the
built-in AccuPoint. Your Satellite computer can support either a
serial mouse or PS/2-compatible mouse.
TECHNICAL NOTE: A serial mouse disables the AccuPoint.
With a PS/2 mouse, you can choose to have the AccuPoint
active at the same time.
Connecting a serial mouse
To connect a serial mouse, connect the mouse cable to the serial
11" J port at the back of the computer. Once connected, the mouse is
ready to use.
Refer to your mouse documentation for configuration information.
Connecting a PS/2 mouse
CAUTION: Make sure the computer is off before you attach
the mouse. Connecting a PS/2 mouse with the computer's
power on can damage the mouse, the computer, or both.
To connect a PS/2 mouse:
1 Open the Start menu and click Shut Down.
Windows 98 displays the Shut down Windows dialog box.
Part I: Getting To Know Your Computer