Toshiba Satellite 4030CDT - Page 145

Exploring Your Options
Using MS-DOS programs
5 To verify that the modem is set up properly, select the port to
which your modem is connected and then click More Info to
run Windows 98 Modem Diagnostics.
TECHNICAL NOTE: Windows 98 communicates with the
modem and displays identifying information reported by the
modem. If Windows 98 cannot communicate with the
modem, it displays an error message. Consult the trouble
shooting sections of your modem and Windows 98 docu
mentation.
6 Click OK to close the Modem Properties dialog box.
7 Close the Control Panel.
Using MS-DOS programs
Most MS-DOS programs will run in Windows 98. If an MS-DOS
program does not run:
1 Click Start, then Shut Down.
Windows 98 displays the Shut Down Windows dialog box.
2 Click Restart in MS-DOS mode, then click OK.
Windows 98 shuts down the computer, then restarts it in MS-
DOS mode and displays a system prompt.
3 Refer to the program's documentation for the command that
starts the program.
4 At the system prompt, type the command and press Enter.
Part I: Getting To Know Your Computer