IPT2008-SDL Settings
Configurations
24 Strata CIX Telephones Administrator Manual 06/06
Ping Start and Stop
³ From the Loop Back Test Screen, press the Ping
Start soft key. The Pinging Screen displays
(shown right) and Pinging starts.
Notes
• Pinging is attempted ten times on the Pinging
Screen and is stopped automatically. The screen
will move to the Loop Back Test Screen. The
result is displayed in the third line of the Loop
Back Test Screen as “Last result n/10
(successful operations/10).”
• During Ping execution, the progress is
displayed by showing “Executing n/10 (number of successful operations/number
of trial operations)” in the third line on the Pinging Screen.
• Pressing the “Ping Stop” or “EXIT” key on the Pinging Screen will stop Pinging
and cause the screen to move to the Loop Back Test Screen. Then the result will be
displayed.
Pinging
Ping to 192.168.0.77
Executing 5/5
Ping Stop
[EXIT]
CONFIG
To Next Page
Loading...
Need help?
General