4.4 PC card/Bridge media/Smart card 4 Replacement Procedures
4.4.3 Smart card
Removing the Smart card
To remove the Smart card, follow the steps below and refer to Figure 4-6.
CAUTION: Insert or remove a Smart card in accordance with any instructions in the
Smart card manual or the manuals of the computer system you are using.
1. Pull out the Smart card from the card slot.
Smart card
Figure 4-6 Removing the Smart card
Installing the Smart card
To install the Smart card, follow the steps below and refer to Figure 4-6.
1. Insert the Smart card into the card slot.
2. Push it carefully to ensure a firm connection.
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-17
To Next Page
Loading...
