4.28 Touch pad/Fingerprint sensor board 4 Replacement Procedures
6. Disconnect the touch pad button FFC from the connector on the touch pad and peel
off the touch pad.
NOTE: Do not reuse the removed touch pad. Be sure to use a new touch pad.
Touch pad
Connector
COVER ASSY
Touch pad button FFC
Figure 4-53 Removing the touch pad/fingerprint sensor board (4)
Please prepare required parts in advance, when replacing the following item.
Parts List
ITEM
PART NAME Quantity
ITEM No
50 COVER ASSY 1
COVER ASSY
64,64-A TOUCH PAD 1
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-83
To Next Page
Loading...
