OPERATOR’S MANUAL
series Robot Controller
[Operation]
!
DANGER
Prohibited
• During operation, NEVER enter the dangerous area of the robot.
Otherwise, you will be injured seriously.
• DO NOT leave in the working range any machinery or materials
which will hinder the operation. If the equipment went wrong, a
person nearby will be injured or involved in an accident.
• Anyone other than the operator MUST NOT approach the
equipment. Should he negligently touch the dangerous part of
the equipment, he will get injured or involved in a serious
accident.
• NEVER perform an inappropriate operation which is not described
in the instruction manual. Otherwise, the equipment will start by
mistake, resulting in personal injury or serious accident.
!
Danger
• If you feel even a little that you are exposed to danger or that the
equipment works abnormally, press the EMERGENCY stop
pushbutton switch to stop the equipment. If the equipment is
used as it is, you will be injured or involved in a serious accident.
When this happens, ask our after-sale service agent for repair.
• During operation, be sure to close the equipment cover. Should
the cover be opened during operation, you will be struck by an
electric shock or get injured.
• Only a well-trained and qualified person is allowed to perform the
operation. Should the equipment be operated improperly, it will
start by mistake, causing a personal injury or serious accident.
• If the equipment has malfunctioned, turn the power off, identify
and remove the cause of the abnormality, maintain the peripheral
equipment and completely restore the malfunctioned equipment.
Then start the equipment at a slow speed. If the equipment
starts, leaving the abnormality, you will be involved in a serious
accident.
STE 80720
– e –
To Next Page
Loading...
