Toshiba TSL3000 - Insert Mode [INS]

OPERATOR’S MANUAL
series Robot Controller
4.2.2 Insert Mode [INS]
(1) Function
Used to select the insert mode for character input. A character entered
through the keyboard is inserted to the cursor position.
(2) Procedures
(a) Step 1: INS key operation.
Each time the INS key is pressed, the input mode or replace mode is selected
alternately. When the insert mode is already selected, this operation is
unnecessary.
(b) Step 2: Designation of insert position.
Move the cursor to a position where you wish to insert characters, using the
cursor keys (↑, ↓, ←, →).
P R G R A M . N A M C : 5 L : 1
P R O G A M T E S T
S P E E D = 5 0
M O V E A
M O V E B
M O V E C
S A V E D E D I T J U M P F I N D C H A N G >
(c) Step 3: Insertion.
Press a key for a desired character, and the character thus input is inserted at
the cursor position.
P R G R A M . N A M C : 5 L : 1
P R O G R A M T E ST
S P E E D = 5 0
M O V E A
M O V E B
M O V E C
S A V E D E D I T J U M P F I N D C H A N G >
STE 80720
– 4-6 –