150Mbps Wireless AP/Client Router User Guide
55
outgoing calls.
4.7.2.1 Dial Plan List
Dial plan List allows the Modem Router to use specific defined account or network to make
outgoing calls. Prefix number is the key to making a distinction between VoIP and PSTN call. If
actual numbers dialed match prefix number defined in the dial plan, the dialed number will be
routed to the specified network according to this plan. Besides, operation of stripping prefix,
replacing prefix or adding prefix, is helpful for users to make a quick and easy call.
Figure 4-37
¾ Prefix: Displays the prefix of your plan. This prefix refers to the initial digit(s) of the numbers
you dial.
¾ Op: Displays the operation of this plan.
¾ Destination: Displays the account or network used for this plan.
¾ Enable: Displays the interface(s) enabled in this plan.
¾ Remove: Check the box and then click the Remove button below so that the very plan will
be deleted.
¾ Edit: Click the Edit button to modify the very plan.
To add a dial plan, click the Add button in Figure 4-37. Fill in the following parameters and click
the Save button in Figure 4-38.
Figure 4-38
¾ Prefix: Set number(s) as the prefix. Up to 16 characters can be entered.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
