TPS smartCHEM-Titro - Page 13

13
4. Connect the Burette Cable (130122) to the RS-232 socket on the Schott Burette and
the Burette socket on the smartCHEM-Titro. See the Schott Burette handbook for full details
on setting up this device. The default factory settings should not need to be changed for use
with the TPS smartCHEM-Titro.
5. Connect the pH sensor to the pH/mV/Ion socket and the Temperature sensor to the
Temperature socket of the smartCHEM-Titro.
6. Other apparatus that will be required includes…
• Magnetic stirrer
• Wash bottle with distilled water