TPS smartCHEM-Titro - 14 Setting the Clock

55
14. Setting the Clock
1. Select the Clock Set-up menu ( →
→→
→ F4:Setup →
→→
→ F2:Clock )
2. The display now shows the current time, for example…
Time is now 12:00
Enter Time 12:00
3. Use the Numeric Keypad to enter the current time, then press .
Alternatively, press menu to quit and retain the current setting.
4. If you pressed above, the display will now show the current date, for example…
Date is now 31/12/04
Enter Date 31/31/04
dd/mm/yy
5. Use the Numeric Keypad to enter the current date, then press .
Alternatively, press menu to quit and retain the current setting.
Notes
1. The smartCHEM-Titro tests that a valid day of the month is entered. If an invalid date is
entered (eg. 31/04/2004), the smartCHEM-Titro beeps and displays the message “ Invalid
Date ”. The meter then returns to the clock setting screen so that the correct date can be
entered.
2. The smartCHEM-Titro also tests for leap years.