TPS smartCHEM-Titro - Changing the Access Code; Disabling the Access Code System

44
11.3 Changing the Access Code
1. Select the Access Code menu ( →
→→
→ F6:Access ).
(Of course, you will need to enter the current access code after pressing .)
2. Select F1:Change Code from the menu.
3. The smartCHEM-Titro now prompts you to enter a new access code…
New Access code:_
Enter a new code of up to 4 digits using the numeric keypad.
If less than 4 digits are entered, press to save the new code.
If 4 digits are entered, it is not necessary to press .
Press to quit without changing the Access Code.
4. The smartCHEM-Titro now prompts you to re-enter the access code for verification…
New Access code:_
Re-Enter to Verify
Re-enter the access code as per the previous step.
Press to quit without changing the Access Code.
5. The smartCHEM-Titro now confirms that the Access Code system is enabled before returning
to the Access Code menu.
11.4 Disabling the Access Code System
1. Select the Access Code menu ( →
→→
→ F6:Access ).
(Of course, you will need to enter the current access code after pressing .)
2. Select F3:Disable Security from the menu.
3. The smartCHEM-Titro now confirms that Access Code system has been disabled before
returning to the Access Code menu.