39
9. Display Backlight
The smartCHEM-Titro is fitted with an Electro-Luminescence (“EL”) backlight. This can be set
up according to your preferences as follows…
1. Switch the meter on.
2. Select the Backlight menu (
→
→→
→ F4:Setup →
→→
→ F3:Backlight
).
3. The Backlight menu is now displayed…
BACKLIGHT
F1:On F2:Off
>F3:Energy Saver
The arrow indicates the current selection.
Press to set the Backlight to be on continuously.
Press to set the Backlight to be off continuously.
Press to set the Backlight to turn on automatically whenever a key is pressed. It will turn off
automatically if no key has been pressed for 5 minutes.
To Next Page
Loading...
