TPS smartCHEM-Titro - 4 Standard Ph Mode; Selecting Ph Mode

19
4. Standard pH Mode
4.1 Selecting pH Mode
To select or change the pH Mode…
1. Select the Mode menu ( →
→→
→ F3:Mode )…
Mode
>F1:0.01pH F2:0.001pH
F3:mV F4:Rel mV
F5:Titrator
The arrow indicates the current selection.
Press to select pH mode with 0.01 pH resolution.
Press to select pH mode 0.001 pH resolution.
Press to quit without changing the current selection.