Physical Features
Reset Button:
Use of the reset button will erase data for the current ride including
stop watch and trip distance. ODO and ART are permanent.
Striker has an internal 3.0V watch type battery (#CR2032). The
computer can be run from the internal battery without being
connected to a vehicle power source. For proper, full-featured
use (LEDs and voltage readouts), connect to vehicle power.
To change the battery, unscrew the battery cap on the back of
the computer with a coin. Make sure the positive side of the
battery is facing up when replaced.
REPLACE WITH BATTERY MODEL NUMBER #CR2032
Internal Battery:
•
•
•
BATTERY
RESET
BUTTON
MOUNTING
HOLES
To Next Page
Loading...
Need help?
General