FAQ Troubleshooting
Try the reset button on the back of Striker.
The internal battery may be dead, or Striker is not hooked up
to vehicle power properly. Review installation procedure.
The voltage readout works on systems with any type of battery
(lead acid, NiMH, NiCad, Li-Ion, etc.)
Striker works best on vehicles with DC electrical systems
(where a battery or capacitor is installed.) The voltage readout
will be accurate and comparable to quality multi-meters.
Striker will operate on AC electrical systems but displays
voltage with less accuracy. (Not a true RMS meter.)
Striker operates with a 4-point floating voltage average.
The speed sensor/magnet may be installed incorrectly. Double
check installation. See page 14-15.
The wheel size setting may be incorrect. Please review wheel
size measurement instructions in this manual. See page 16.
Why does nothing work?
•
•
What kind of electrical systems does Striker work with?
•
•
•
•
Everything is working, but the (K)MPH reading is way off.
•
•
Frequently Asked Questions:
To Next Page
Loading...
Need help?
General