Trail Tech STRIKER - Configuring High Temperature Alerts

35
35
Setup Mode
Setup High Temperature LED:
MODIFY DIGIT: LEFT BUTTON
NEXT DIGIT: RIGHT BUTTON
TO CONFIRM, PRESS THE CENTER BUTTON.
Striker will move on to the next setting.
MODIFY DIGIT: LEFT BUTTON
NEXT DIGIT: RIGHT BUTTON
TO CONFIRM, PRESS THE CENTER BUTTON.
Striker will move on to the next setting.
If engine temperature reaches
this setting, the red LED will
turn on as a critical warning.
0º (default) disables this alert.
If engine temperature reaches
this setting, the yellow LED will
turn on as a caution.
0º (default) disables this alert.
Setup Danger Temperature LED: