21
System Features
Speedometer:
Description: The speedometer function provides a display of
current, average and max speed. Vehicle speed is calculated from
the wheel sensor and user-entered wheel circumference.
Speed: Displayed on screen 1
accompanied by a lit SPD icon.
Average Speed: Displayed
on screen 3 with a lit AVG SPD
icon. AVG SPD is reset during
a trip data reset.
Maximum Speed: Displayed
on screen 3 with a lit MAX SPD
icon. Max speed is reset during
a trip data reset.
By default, Striker alternately displays avg speed and max
speed every 2 seconds on screen 3. Average speed can move
to screen 2 using setup mode. If done, average speed will
move to screen 2 and replace the current speed. (pg.38)
SPD on Screen 1
AVG SPD on Screen 3
MAX SPD on Screen 3
To Next Page
Loading...