Setup Mode
Setup Average Speed’s Screen:
Choose screen for AVG SPD
(default 3.) If screen 3, then
AVG SPD and MAX SPD rotate
every 2 seconds. If screen 2,
AVG SPD replaces SPD.
MODIFY DIGIT: LEFT BUTTON
NEXT DIGIT: RIGHT BUTTON
TO CONFIRM, PRESS THE CENTER BUTTON.
Striker will move on to the next setting.
Setup Distance Resolution:
TO CONFIRM, PRESS THE CENTER BUTTON.
Striker will return to normal mode.
TO CYCLE BETWEEN ONE (0.0) and TWO
(0.00) DECIMALS, PRESS LEFT BUTTON.
Choose if Striker should
display one (0.0) or two (0.00)
decimal places for distance
and odometer.
To Next Page
Loading...
Need help?
General