AC - A 23
Electronic Air Cleaners
the entire Collection Cells. Vacuum using even strokes
in one direction, then repeat the process using even
strokes in the opposite direction, as demonstrated in
Figure 14.
Step 2
Once vacuuming is completed on one side of the Col-
lection Cells, turn the Collection Cells over and re-
peat on the other side of the Collection Cells.
Note: It is normal for Collection Cells to discolor dur-
ing operation. Vacuuming will not restore the Collec-
tion Cells to their original color. However, vacuuming
does restore the Collection Cells to a high efficiency.
Replacing The Pre-Filter And Collection Cells
Into The Air Cleaner
Step 1
Replace the Pre-Filter into the Air Cleaner. Ensure
that the “Air Flow indicator arrow” on the Pre-Filter is
pointing in the same direction as the “Air Flow indica-
tor arrow” on the Air Cleaner cabinet.
Step 2
Reinstall the Collection Cells into the Air Cleaner.
Ensure the handles on both of the Collection Cells
are folded flat. Refer to Figure 16.
Step 3
Replace the power door onto the Air Cleaner.
Step 4
Ensure the power cord is plugged into the Air Cleaner.
Step 5
Press the Power button to turn on the Air Cleaner.
Note: Once you press the Power button, the first LED
will be on and it will start flashing after the first 10 [12]
minutes of indoor fan operation. This is normal opera-
tion.
Alternate Cleaning Option For Homeowners
with 200 or 200-1 Collection Cells Only
Vacuuming the Pre-Filter and Collection Cell restores
them to a high efficiency. However, some environmen
To Next Page
Loading...
