Trane Voyager TC* - Evaporator Fan Performance 20 Tons with Gas Heat YC*241 Standard or TXV Refrigeration System Downflow or Horizontal

64 RT-PRC024-EN
Performance Data
(20 Tons High Efficiency)
Table 46. Evaporator Fan Performance 20 Tons with Gas Heat YC*241 Standard or TXV Refrigeration System Downflow or Horizontal
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
5-HP Standard Motor & Field Supplied Low Static Drive
(i)
(i)
Field Supplied Fan Sheave BK190 required. Field Supplied Belt may be necessary.
5-HP Standard Motor & Drive
6400 527 1.76 558 1.96 586 2.13 611 2.28 635 2.45 660 2.62 684 2.82 709 3.02 733 3.22 756 3.41
7200 585 2.44 614 2.67 640 2.88 664 3.06 686 3.24 708 3.42 729 3.61 751 3.82 773 4.04 795 4.26
8000 643 3.29 670 3.54 965 3.79 718 4.01 739 4.21 759 4.41 778 4.61 798 4.82 817 5.04 837 5.27
8800 702 4.33 727 4.59 750 4.87 772 5.13 792 5.37 811 5.60 830 5.81 848 6.03 866 6.25 883 6.48
9600 761 5.56 784 5.85 807 6.15 827 6.45 847 6.73 865 6.99 883 7.23 900 7.46 916 7.70 933 7.94
7.5-HP Oversized Motor w/Field Supplied Sheave
(ii)
(ii)
Motor Sheave IVP50 required. Field Supplied Belt may be necessary.
7.5-HP Oversized Motor & Drive
Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
5-HP Standard Motor & Drive 5-HP Standard Motor & High Static Drive Accessory
6400 779 3.62 802 3.83 852 4.05 846 4.27 868 4.49 889 4.72 909 4.96 929 5.20 949 5.45 968 5.71
7200 816 4.49 837 4.71 857 4.94 878 5.17 898 5.41 919 5.65 938 5.90 958 6.14 978 6.38 999 6.63
8000 857 5.57 876 5.76 896 6.01 915 6.26 933 6.51 952 6.76 970 7.01 989 7.26 — — — —
8800 901 6.73 919 6.98 937 7.25 955 7.52 973 7.80 991 8.07 — — — — — — — —
9600 949 8.19 965 8.44 — — — — — — — — — — — — — — — —
7.5-HP Oversized Motor & Drive
For Standard Evaporator Fan Speed (RPM), reference Table 50.
For Standard Motor & Low Static Drive Accessory Fan Speed (RPM), reference Table 51.
For Oversized Evaporator Fan Speed (RPM), reference Table 53.
Fan motor heat (MBH) = 3.15 x Fan BHP.
Notes:
Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.
Refer to Table 54 to determine additional static pressure drop due to other options/accessories.
Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all
cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor
failure. Our product's warranty will not be affected.