2
Batching (F30 = 7) ................................................................................................................... 29
Weigh-In/Weigh-Out (F30 = 8) ................................................................................................ 30
SERIAL (COM) PORT INFORMATION ................................................................................ 33
SERIAL PORT MODES ........................................................................................................... 33
OUTPUT STRINGS ................................................................................................................. 34
ERROR MESSAGES ............................................................................................................ 36
SPECIFICATIONS ................................................................................................................ 36
TROUBLESHOOTING .......................................................................................................... 37
©Transcell Technology, Inc. 2010-2022. All rights reserved.
The information contained herein is the property of Transcell Technology and is supplied without liability for errors or
omissions. No part may be reproduced or used except as authorized by contract or other written permission. The copy-
right and the foregoing restriction on reproduction and use extend to all media in which the information may be embod-
ied.
Contents subject to change without notice.
THIS EQUIPMENT CONTAINS NO USER SERVICEABLE COMPONENTS.
- Servicing of the equipment must only be carried out by trained and authorized
personnel.
- Use only the internal AC adapter supplied with the indicator. Other power sup-
plies may cause damage.
Routine maintenance
- Harsh abrasives, solvents, scouring cleaners and alkaline cleaning solutions
should not be used, especially on the display window.
- The outside of the product may be sprayed with water as needed.
To Next Page
Loading...
Need help?
General
