Transcell Technology TI-1680 Manual

33
SERIAL (COM) PORT INFORMATION
SERIAL PORT MODES
DEMAND DUPLEX MODE
The Demand Duplex Mode provides a two-way serial transmission mode. In this mode,
the output information is transmitted on demand; either by pressing the PRINT key or
upon receiving a recognized command from a host.
NOTE: Ensure that your cabling has a crossover (null modem) and contains the proper
handshaking lines.
CONTINUOUS DUPLEX MODE
The Continuous Duplex Mode provides a two-way serial transmission mode. In this
mode, the output information is transmitted continuously making it a popular choice for
remote displays and other remote devices requiring a constant data stream. The trans-
mission automatically occurs at the end of each display update.
RECOGNIZED HOST COMMANDS
ASCII code
(Hex)
Symbol
Action by the instrument
50
P
Transmit the displayed weight through the serial port.
5A
Z
Zero the scale
54
T
Tare the scale
47
G
Puts the scale into Gross display mode
4E
N
Puts the scale into Net display mode
43
C
Change the displayed unit of measure, e.g., lb or kg
Please note that host commands may be ignored if the scale is in motion, in positive
overload or in negative overload.
AUTO PRINT MODE
The Auto Print Mode provides a one-time serial transmission once a non-zero, stable
condition has been achieved.

Transcell Technology TI-1680 Specifications

General

Brand	Transcell Technology
Model	TI-1680
Category	Touch Panel
Language	English