3
BASIC OPERATION
Getting Started
Simply plug the unit into a suitable AC wall outlet (100 – 240 VAC). After a brief initialization pe-
riod, the scale will revert to a zero (“0”) weight display.
Your scale is now ready for operation!
Operation – TI-1680
Before weighing it is necessary to check if the scale is unloaded and indicating zero weight in
the desired unit of measure, for example lb for pounds.
If the indicator is not displaying the desired unit of measure, press the UNITS key a few times
until it is indicated, e.g., lb for pounds, kg for kilograms, etc.
The indicator features an automatic zero correction meaning that small deviations will be zeroed
automatically. If the indicator does not automatically determine the zero point, press the ZERO
key once briefly.
To Next Page
Loading...
