Transportation and installation
Final installation on-site
41
Final installation on-site
We recommend having the installation carried out by TRANSNORM
SYSTEM GmbH. Alternatively, final installation may be carried out under the
supervision of, or following instruction by TRANSNORM SYSTEM GmbH.
In any case, installation must be carried out by specialised staff authorised
by the user/operating company.
Please note that some steps in the following assembly instructions may not
apply to your individual conveyor due to variations in design and equipment.
Installation
TS 1300 Indexing conveyor/short track conveyor are almost always deliv-
ered in one piece. Multipart deliveries require assembly by TRANSNORM
SYSTEM GmbH. Do not mount these machines yourself.
Carrying out installation
Depending on the design, the supports are either equipped with standpipes
or support angles. Installation is carried out in accordance with the support
layout drawing. The supports must always stand vertically; this also applies
to tracks with an incline.
To Next Page
Loading...
