Maintenance and repair
Spare part purchasing
57
Maintenance and repair
Spare part purchasing
Only genuine TRANSNORM SYSTEM GmbH spare parts may be used. DIN
parts may be ordered from specialised trade.
When making inquiries or placing orders, we recommend that you send a
copy of the spare parts list to our customer service department, stating the
type and amount of parts required. You will find the address at the beginning
of these operating instructions.
The spare parts list is an integral part of the technical order documentation.
The steps described in this section are to be carried out by qualified
personnel only.
Tools, equipment and supplies
Tools, equipment and supplies
Tools Auxiliary equipment Operating materials
Set of tools (spanner,
screwdriver, pliers etc.)
Pneumatic screwdriver Electricity and voltage
supply
Torque wrench If necessary, frequency/initial
tension measuring device for
toothed belts
Compressed air supply
for cleaning
Circlip pliers Device for lifting and lowering
the machine or parts of it
Combination spanner 10
13 14 15 17 19 22 and
24 mm
Trolley, movable platforms
with automatic locking device
Hexagon socket wrench
22.53456 and 8 mm
Ladders, steps, pedestals on
working platforms
Hexagon socket wrench
with ball head 5 and 6 mm
Assembly paste
To Next Page
Loading...
