Troubleshooting
Motor and gear unit
84
Operating instructions: Indexing conveyor/short track conveyor TS 1300
Version 3.6ENG, 28.02.2019
Motor and gear unit
Should a fault occur in the drive motor, please refer to the operating instruc-
tions provided by the motor manufacturer for information on how to remedy
the fault.
The motor operating instructions are an integral part of the system.
Abnormal noise from
flange bearings
Pulley journal turning in internal
ring of bearing
Replace rolling bearing
and pulley if necessary
Rolling bearing defective Replace rolling bearing
Abnormal noise from
support rollers
Rolling bearing defective Replace roller
Mechanical faults (contd.)
Fault identified Possible cause Remedial action
To Next Page
Loading...
