Guest Network
Create an isolated network for guest internet access only (router mode only)
VPN Passthrough Support
Secure remote access with IPsec, PPTP, and L2TP VPN passthrough support
IPv6
IPv6 network support
*WISP mode is not compatible with captive portal wireless login pages
**Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and cover-age will vary depending on
interference, network traffic, building materials and other conditions. For maximum
performance of up to 1.3 Gbps use with a 1.3 Gbps 802.11ac wireless adapter.
Product Hardware Features
Front View
Power LED: LED turns blue when the unit is on.
WAN / LAN LED: LED lights blue when the Ethernet port is connected. Blinks during
data transmission.
Wireless LED: Blinks blue during wireless data transmission
WPS LED/Button: Blinks when WPS is activated. Press and hold for 5 seconds to
activate WPS.
Reset button: Press and hold for 10 seconds to reset the device into default
settings.
To Next Page
Loading...
