Triax TR 212 - Quick Guide; Initial Installation Overview

8
USB
SPDIF
HDMI
2-CH AUDIOOUT
L
R
CO
Quick Guide
Initial installation overview
Preparation
1 2 3
Watch TV
Run the
Initial Settings
1 Connect the antenna
cable to the RF IN
terminal
1 Turn on the standy button
on the Receiver
1 Congratulations!
You can now watch TV
2 If neccessary, adjust
the antenna to attain
maximum signal
reception
2 Run the rst time
installation
Ensure the antenna
is connected
Highlight Start Search
Press OK to continue
Start Searching Channels
2 Connect the Receiver
to your TV using the
supplied HDMI cable
3 Connect the power
adapter to the Receiver
and switch socket on.
Follow the steps below one by one when using the Receiver for the rst time
OPTICAL HDMI
RF in
RF out