34
General Information
Cruise Control Light
Cruise control (see page 59) can
only be activated when the
motorcycle is travelling at a speed
between 30 to 100 mph (48 to
160 km/h) and is in 4
th
gear or higher. When
activated, the cruise control light in the
instruments will be illuminated, and the set
speed will be displayed in the lower message
area.
1. Cruise control light
2. Instrument message
Multi-function Display Screen
Clock
The clock will display the time in 12 or
24 hour formats.
To change the display format from 12 to
24 hour, and set the time, see SETTINGS on
page 43.
Ambient Air Temperature
The instruments will display the ambient air
temperature in ºC or ºF.
To change the temperature from ºC or ºF,
refer to Changing Units on page 49.
1. C l o c k
2. Temperature display
Cruise control must only be used where
you can ride safely at a steady speed.
Cruise control should not be used when
riding in heavy traffic, on roads with
sharp/blind bends or when roads are
slippery.
Using cruise control in heavy traffic, on
roads with sharp/blind bends or when
roads are slippery, may result in loss of
motorcycle control and an accident.
To Next Page
Loading...
