EasyManua.ls Logo

Triumph Trophy - Windshield

Triumph Trophy
180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
84
General Information
The sockets will provide a 12 Volt electrical
supply. All sockets are protected by 10 Amp
fuses, therefore items with a current draw
greater than 10 Amps (120 Watts) must not
be plugged into the socket.
The sockets are powered as follows:
The engine mounted socket is
permanently live.
The top box (if equipped) and glove box
sockets are live when the ignition is
switched on.
The pillion socket (if equipped) is live
when the engine is running.
Plugs, suitable for use with the accessory
sockets, are available from your authorized
Triumph dealer.
Windshield
Warning
Never attempt to clean the windshield
while riding the motorcycle. Removal of
the rider's hands from the handlebars
while riding the motorcycle will diminish
the ability of the rider to maintain control
of the motorcycle. Attempting to clean the
windshield while riding the motorcycle
may result in loss of motorcycle control
and an accident.
Warning
Never place loose items of clothing,
fingers, hands or any other part of the
body near the windshield during
adjustment.
Personal injury may result from trapping
parts of the body or loose items of clothing
between the windshield and the
motorcycle bodywork.
Although the windshield mechanism
incorporates a pressure sensitive 'pinch
guard' feature designed to prevent
personal injury, this function must not be
relied upon to do so.

Table of Contents

Other manuals for Triumph Trophy

Related product manuals