64
General Information
Ignition Switch Positions
This is a four position, key operated switch.
The key can be removed from the switch
only when it is in the OFF, LOCK or P (PARK)
position.
TO LOCK: Turn the handlebar fully to the
left, turn the key to the OFF position, push
and fully release the key, then rotate it to the
LOCK position.
PARKING: Turn the key from the LOCK
position to the P position. The steering will
remain locked, and the position lights will be
switched on.
Note:
• Do not leave the steering lock in the
P position for long periods of time as
this will cause the battery to
discharge.
For reasons of security and safety, always
move the ignition switch to the OFF
position and remove the key when leaving
the motorcycle unattended.
Any unauthorized use of the motorcycle
may cause injury to the rider, other road
users and pedestrians and may also cause
damage to the motorcycle.
With the key in the LOCK or P position the
steering will become locked.
Never turn the key to the LOCK or
P positions while the motorcycle is moving
as this will cause the steering to lock.
Locked steering will cause loss of
motorcycle control and an accident.
To Next Page
Loading...
