85
General Information
To Adjust the Windshield
1. Windshield adjuster switch
The windshield is adjusted electrically, by
means of a switch located on the left hand
handlebar.
To adjust the windshield, the ignition must be
on. Adjustment is possible with the
motorcycle stationary or in motion.
Press the adjustment button upwards to raise
the windshield and downwards to lower the
windshield.
The windshield can be adjusted as follows:
• Ignition on - the windshield can be
adjusted;
• Engine started - the windshield returns to
the position stored at ignition off;
• Engine started, but the windshield has
been adjusted with the ignition on prior
to starting - the windshield does not
move as the memorized position has
been over-ridden by the user;
• Ignition off - the current windshield
position is stored and the windshield
lowered.
If the windshield encounters resistance before
it reaches the lower or upper limit, position
the pressure sensitive 'pinch guard' system
will activate. The windshield will stop and
reverse direction slightly to avoid the
obstruction.
To Next Page
Loading...
