Need help?Do you have a question about the Trocen AWC608C and is the answer not in the manual?
Details system overview, composition, software versions, and OS requirements.
Highlights key capabilities and advantages of the laser cutting software.
Provides a step-by-step guide for installing the LaserCAD software.
Warns about potential issues like antivirus interference and file damage.
Introduces the primary interface elements for laser machining operations.
Explains how to establish communication between computer and control panel.
Details the procedure for selecting and configuring USB communication.
Details the procedure for selecting and configuring network communication.
Covers workspace, parameters, and advanced functions configuration.
Guides on opening, saving, importing, and exporting files.
Covers creating basic graphics and editing object nodes.
Explains object selection, transformations, aligning, and grouping.
Details various tools for image processing and optimization.
Instructions on how to reset software parameters to default settings.
Sets laser head position relative to figure and configures array output.
Manages layer settings for power, speed, and other parameters.
Covers downloading data, machine control, and file management.
Guides on installing and using the AWCLaserCut tool in CorelDraw.
Explains importing DST/DSB files and switching to LaserCAD.
Guides on adding the AWCLaserCut toolbar and menu in AutoCAD.
Explains how to switch from AutoCAD to LaserCAD with diagrams.
Details key functions, interface elements, and file properties.
Covers UDisk files, parameter options, origin management, axes control, and network config.
Explains Z/U axis controls and the file system management.
Details key functions, interface elements, and file properties.
Covers UDisk files, parameter options, origin management, axes control, and network config.
Explains Z/U axis controls and the file system management.
Provides access to configure manufacturer-specific parameters.
General| Model | AWC608C |
|---|---|
| Communication Interface | USB, Ethernet |
| USB Interface | USB 2.0 |
| Type | Laser Controller |
| Control Mode | PWM |
| Laser Power Control | Yes |
| Motor Control | Stepper motor control |
| Display | LCD |
| Offline Operation | Yes |
| Output | Digital outputs |
| Operating Temperature | 0°C - 40°C |
| Humidity | 5-95% (non-condensing) |
To Next Page
