Trotec SP3000 - Page 33

SP3000
Technical Data
BA 8034_2.4_EN (12/2016) 33 / 87
www.troteclaser.com
Electrical & Exhaust
Exhaust working point
Min. 2.500 m³/h at 800 Pa (Min. 1.200 cfm at 8.900 in H
2
O)
(Table exhaust)
Min. 100 m³/h at 4.450 Pa (Min. 60 cfm at 17.865 in H
2
O)
(Travelling exhaust)
Minimum requirement for acrylic cutting; Depending on application
Voltage & power consumption
(Machine without chiller
3x400V (3xL+N+PE) 50/60Hz, max. 1,6 kW (60 watts)
3x400V (3xL+N+PE) 50/60Hz, max. 3,1 kW (100 watts)
3x400V (3xL+N+PE) 50/60Hz, max. 4,5 kW (200 watts)
3x400V (3xL+N+PE) 50/60Hz, max. 8,4 kW (400 watts)