NORMAL.DOT Gespeichert in:G:\Support\Dokumentationen_CDs\8003Speedy\Service Manual\Servicemanual 8003.doc Gespeichert am:2003/03/10
max Version 14
Seite 7 von 87
T H E U L T I M A T E M A R K
2. Safety information
Please read this chapter before operating or servicing a Speedy laser system!
General
The Speedy is an industrial apparatus with a high level of security. To guarantee a
safe operation it is necessary to know potential dangers and avoid risks. The
dangers can be classified in three categories:
ì Dangers caused by the laser beam
ì Dangers caused by electricity
ì mechanical dangers
General Safety Instructions
When working with the laser engraver please take note of the following safety
instructions:
1. Operation and service of the Speedy may only be performed by trained
personnel.
2. Direct exposure of skin or eyes to laser radiation may cause severe injuries.
The correct operation and service according to the manual can prevent
hazards. Operators may perform procedures required inside the housing
only through the interlocked door. They must never attempt to defeat the
door interlocks nor remove non interlocked portions of the housing.
3. The laser beam can ignite flammable materials. Therefore a fire
extinguisher should always be nearby. Do not store flammable materials
near or inside the laser engraver.
To Next Page
Loading...
Need help?
General
