► To enable the K value and store it in memory for later use, press
〈YES〉. The display will be:
Enter the appropriate value (1-4) and press 〈START/ENTER〉:
After a short delay, the display is:
The offset will be enabled and the display will return to READY.
Moisture Offset - Stored Value
To recall a previously stored moisture offset, press 〈2〉 from the last display
on page
5–5.
The display will be:
Enter the appropriate value (1-4) and press 〈START/ENTER〉:
The offset will be enabled and the display will return to READY.
M
em
or
y
l
oca
ti
on
of
M
-Offse
t:
(1-4)
M
em
or
y
l
oca
ti
on
of
M
-Offse
t:
(1-4)
SAVED
K
=x
.
xx
l
oc
at
i
on
x
ENABLED
K
=x
.
xx
ENABLED
K
=x
.
xx
To Next Page
Loading...
