UNPACKING AND INSPECTION
Upon receipt of the Model 4140 Gyratory Compactor from the
factory, a complete inspection and inventory should be performed.
If any parts or accessories appear damaged, notify the carrier and
your Troxler Representative immediately.
Check to see that the following are included:
♦
Model 4140 Gyratory Compactor
♦
Extruder
♦
Printer
♦
Parallel printer cable
♦
Serial cable
♦
Height calibration spacer
♦
Specimen papers (500 per package)
♦
Manual of Operation and Maintenance
Inspect each part for damage.
See page 2-3 for a guide to assembly.
To Next Page
Loading...