SCHEDULE OF MAINTENANCE
For printer maintenance, see the printer Operating Instructions.
NOTE
The user can use any degreasing cleaner and a clean rag
to clean metal parts.
Use only isopropyl alcohol and a clean rag to clean the o-ring.
See safety warnings on page 2-2.
Before Each Cycle
✓
Clean the turntable and loading head with a degreasing cleaner.
✓
If compacting a specimen at an angle less than 0.7°, apply a
light lubricant such as Slick 50 One Lube to the turntable before
each compaction cycle.
Daily
✓
Clean the mold, the puck, the loading head, the support ring,
and the cam followers (that is, the three rotating parts around
the turntable) with a degreasing cleaner.
✓
Apply a light coat of Magnalube-G to the cam followers and
support ring.
Every 80 Hours of Operation
✓
Vacuum the entire turntable area.
✓
After cleaning the turntable and vacuuming the area, wipe the
turntable with a clean, dry cloth.
To Next Page
Loading...
Need help?
General
