Troxler 4140 User Manual

Model 4140
3-
PRINT CALIBRATION
To print the last calibration set, press 〈5〉 at the Calibration menu on
the control unit (see page 3-3). A calibration set includes the results
of the pressure, height, angle, and rotation calibrations.
The control unit allows the user to send the results to either the
printer (printer port) or a computer (serial port). After the user
selects the correct port, the unit outputs the results and returns to the
Calibration menu. To return to the Machine Idle screen, press
〈ESC〉.
3. CALIBRATION

Troxler 4140 Specifications

General

Brand	Troxler
Model	4140
Category	Laboratory Equipment
Language	English