Every 1000 Hours of Operation
✓
Contact Troxler for a system overhaul.
Every 2500 Hours of Operation
✓
Change the oil in the rotation gearbox.
✓
Remove the right shroud. DO NOT get anything in the
electronic components!
✓
Place a pan under the drain plug located on the bottom.
✓
Using a 1/4" hex wrench, remove the drain plug.
✓
Allow the oil to drain.
✓
Using a 1/4" hex screw, replace the drain plug.
✓
Using the vent plug opposite the motor, fill the gearbox
with an AGMA #7C lubricant.
To Next Page
Loading...