TRUE SOLTEC CS07 User Manual

35
5. Remove the wheel bearing of the standard
cutting disc.
6. Mount the wheel bearing of the longitudinal
cutting disc.
7. Place the cutting wheel to the arbor.
Then, mount the flange to the wheel firmly by
rotating the screw counterclockwise.
※This is a reverse screw.
8. Return the metal protective cover to its original
location.
→ Turn on the power of CS07.
→ Press HOME button to move the
transfer unit to its home position.
Setting is completed.
Counterclockwise

TRUE SOLTEC CS07 Specifications

General

Brand	TRUE SOLTEC
Model	CS07
Category	Monitor
Language	English