TRUE SOLTEC CS07 - Product Description: Rear View; Rear Panel Components Identification

8
2.2 REAR
1
Power switch
Plug the power cable in → Turn on the power
2
Lens lock screw
Loosen this lock screw to move the camera & lens up and down.
※Hold the camera while loosening this screw
3
Air flow
Connect with an air tube to let the air into the main unit.
4
Metal debris tray
Hold terminal dust/ debris after being cut.
Periodically clean this tray
5
Power supply for vacuum
unit
Provide power for the vacuum unit.
6
Metal dust
Hold the metal dust discharged by the vacuum unit
1
2
3
4
5
6