57
3.1.4.2.2 Static IP
Use this menu to set the printer's IP address, subnet mask and gateway.
Ethernet 2/3
Status
> Configure
Exit
Press and buttons to select the different options and press
button to enter the option. Press key to cancel the setting and
return to the previous menu.
Press button to move the cursor from left to right digits and press the
button to scroll the value from “0” to “9”. Press button to next
setting.
Press the button printer will restart to reset the Ethernet module setting.
Press key to cancel the setting.
Configure 2/3
DHCP
> Static IP
Exit
IP Address
000.000.000.000
Gateway
000.000.000.000
Subnet Mask
000.000.000.000
Static IP
SELECT: YES
MENU: NO
To Next Page
Loading...
Need help?
General
