TSC TTP-345 Programming Manual

TSC AUTO ID Technology Co., Ltd. 146 Copyright 2013 All Rights Reserved.
 POSTINPUT
Description
This command can define the end character for command INPUT.
Syntax
POSTINPUT var$
POSTINPUT CHR$(n)
Parameter
Description
var$
The specific character or string in end of data.
n
n = 1 ~ 255
Note:
This command has been supported since V6.81 EZ and later firmware.
Example
POSTINPUT ">"
POSTINPUT CHR$(3)
See also
PREINPUT, INPUT, SET FILTER

TSC TTP-345 Specifications

General

Print Method	Thermal Transfer
Resolution	300 dpi
Max Print Speed	5 ips
Max Print Length	90" (2286 mm)
Memory	8 MB Flash
Interface	USB 2.0, RS-232
Power Supply	External universal switching power supply