TSC TTP-345 Programming Manual

TSC AUTO ID Technology Co., Ltd. 79 Copyright 2013 All Rights Reserved.
 <ESC>!C
Description
This command restarts the printer and omits to run AUTO.BAS. The beginning of the command is an
ESCAPE character (ASCII 27).
Syntax
<ESC>!C
Note:
 When printer receives this command, printer will restart itself no matter AUTO.BAS exists or not.
 This command has been supported since V5.23 EZ and later firmware.
See Also
<ESC>!Q

TSC TTP-345 Specifications

General

Print Method	Thermal Transfer
Resolution	300 dpi
Max Print Speed	5 ips
Max Print Length	90" (2286 mm)
Memory	8 MB Flash
Interface	USB 2.0, RS-232
Power Supply	External universal switching power supply