TSC TTP-345 Programming Manual

TSC AUTO ID Technology Co., Ltd. 234 Copyright 2013 All Rights Reserved.
 WLAN PORT
Description
This command is used to specify the PORT number of Wi-Fi module. Restart the printer is necessary.
Syntax
WLAN PORT number
Parameter
Description
number
Base raw port number. Default is 9100.
Example
Sample code
WLAN MODE INFRASTRUCTURE
WLAN SSID "TEST-AP"
WLAN WPA "123456789"
WLAN IP "10.0.10.138","255.255.255.0","10.0.10.252"
WLAN PORT 8000
SELFTEST WLAN
Result

TSC TTP-345 Specifications

General

Print Method	Thermal Transfer
Resolution	300 dpi
Max Print Speed	5 ips
Max Print Length	90" (2286 mm)
Memory	8 MB Flash
Interface	USB 2.0, RS-232
Power Supply	External universal switching power supply