TSC TTP-345 Programming Manual

TSC AUTO ID Technology Co., Ltd. 87 Copyright 2013 All Rights Reserved.
 <ESC>!F
Description
This command is using to feed a label. This function is the same as to press the FEED button. The
beginning of the command is an ESCAPE character (ASCII 27).
Syntax
<ESC>!F
Note:
This command has been supported since V7.00 EZ and later firmware.

TSC TTP-345 Specifications

General

Print Method	Thermal Transfer
Resolution	300 dpi
Max Print Speed	5 ips
Max Print Length	90" (2286 mm)
Memory	8 MB Flash
Interface	USB 2.0, RS-232
Power Supply	External universal switching power supply