TSC TTP-345 Programming Manual

TSC AUTO ID Technology Co., Ltd. 34 Copyright 2013 All Rights Reserved.
Label Formatting Commands
 BAR
Description
This command draws a bar on the label format.
Syntax
BAR x,y,width,height
Parameter
Description
x
The upper left corner x-coordinate (in dots)
y
The upper left corner y-coordinate (in dots)
width
Bar width (in dots)
height
Bar height (in dots)
Note:
 200 DPI: 1 mm = 8 dots
300 DPI: 1 mm = 12 dots
 Recommended max. bar height is 12 mm at 4” width. Bar height over 12 mm may damage
the power supply and affect the print quality.
 Max. print ratio is different for each printer model. Desktop and industrial printer print
ratio is limited to 20% and 30% respectively.
Example
Sample code
SIZE 50 mm,25 mm
GAP 3 mm,0
DIRECTION 1
CLS
BAR 80,80,300,100
PRINT 1,1
Result
See Also
BOX
80
80
100
300

TSC TTP-345 Specifications

General

Print Method	Thermal Transfer
Resolution	300 dpi
Max Print Speed	5 ips
Max Print Length	90" (2286 mm)
Memory	8 MB Flash
Interface	USB 2.0, RS-232
Power Supply	External universal switching power supply