TSC TTP-345 Programming Manual

TSC AUTO ID Technology Co., Ltd. 232 Copyright 2013 All Rights Reserved.
 WLAN DHCP
Description
This command is used to set the printer to get the IP address from DHCP server. Restart the printer is
necessary.
Syntax
WLAN DHCP
Example
Sample code
WLAN MODE INFRASTRUCTURE
WLAN SSID "TEST-AP"
WLAN WPA "123456789"
WLAN DHCP
WLAN PORT 9100
SELFTEST WLAN
Result
See Also
WLAN IP

TSC TTP-345 Specifications

General

Print Method	Thermal Transfer
Resolution	300 dpi
Max Print Speed	5 ips
Max Print Length	90" (2286 mm)
Memory	8 MB Flash
Interface	USB 2.0, RS-232
Power Supply	External universal switching power supply