TSC TTP-345 Programming Manual

TSC AUTO ID Technology Co., Ltd. 195 Copyright 2013 All Rights Reserved.
Execute:
Syntax
Receive “PRINT m”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT 2
Label 1~2
2.) Press FEED key
Label 3~4
Syntax
Receive “PRINT m,n”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT 1,2
Label 1, Label 1
2.) Press FEED key
Label 2, Label 2
Syntax
Receive “PRINT -1,n”
Print Out
SET PRINTKEY ON or
SET PRINTKEY AUTO
1.) PRINT -1,2
Label 1, Label 1
2.) Press FEED key
Label 1, Label 1
Syntax
Receive “PRINT m”
Print Out
SET PRINTKEY 5
1.) PRINT 2
Label 1~2
2.) Press FEED key
Label 3~7
Syntax
Receive “PRINT m,n”
Print Out
SET PRINTKEY 5
1.) PRINT 1,2
Label 1, Label 1
2.) Press FEED key
Label 2~6
Syntax
Receive “PRINT –1,n”
Print Out
SET PRINTKEY 5
1.) PRINT -1,2
Label 1, Label 1
2.) Press FEED key
Label 1, Label 1

TSC TTP-345 Specifications

General

Print Method	Thermal Transfer
Resolution	300 dpi
Max Print Speed	5 ips
Max Print Length	90" (2286 mm)
Memory	8 MB Flash
Interface	USB 2.0, RS-232
Power Supply	External universal switching power supply